How to Install ELEKTRA SnowTec Heating Mats for Driveway and Walkway S

Winter safety prefers smart solutions—and ELEKTRA’s SnowTec 300 W/m² heating mats deliver just that. Designed for outdoor surfaces like driveways, walkways, ramps, and porches, these ready-made mats offer effective, low-profile protection against snow and ice, ensuring your home stays safe and accessible all season long.

Why Choose ELEKTRA SnowTec Heating Mats?

Simple installation: Mats come pre-assembled with heating cables spaced at 10 cm intervals on a 0.4 m or 0.6 m wide mesh, ranging from 2 m to 25 m in length. They include a 4 m ‘cold tail’ power cable for easy connectivity.
Efficient and reliable performance: Each mat delivers a consistent heat output of 300 W/m², ideal for preventing ice formation on solid masonry surfaces like paving or concrete.
Smart, automatic control: Pair your mats with a thermostat featuring both temperature and moisture sensors. This ensures the system activates only when needed, saving energy and enhancing safety.

Step-by-Step Installation Guide

Plan your layout
Begin by measuring the area that needs protection—typically just the driveway’s traffic paths. Sketch the layout and choose the appropriate size and number of mats.
Prepare the installation surface
- For paved surfaces: embed the mats in a 30 mm layer of compacted sand (or dry concrete).
- For asphalt or concrete: use either the standard SnowTec or the tougher SnowTec Tuff variant, which is capable of direct embedding into asphalt.
Fit and secure the mats
- Lay out the mats (you can trim the mounting tape for shape, but never cut the heating cable itself).
- Secure the mats to prevent shifting—ELEKTRA recommends using a steel or aluminum installation grid or tape for stability.
Handle power connections
Ensure the “cold tail” and any joints remain embedded within the installation layer—not exposed. Always connect to the power supply via an authorized electrician, ideally in parallel circuits if multiple mats are used.
Install the controller and sensor
Place the temperature-moisture sensor in its protective tube and route cabling to the control unit. The thermostat will monitor conditions and activate the system only when snow or ice is detected.
Document your work
Record the final layout plan and affix the provided self-adhesive label (from the mat) into the system’s warranty card—for future reference and coverage.

Final Thoughts

ELEKTRA SnowTec heating mats combine ease of installation, robust performance, and intelligent operation—making them an excellent choice for homeowners seeking reliable winter protection. Whether you’re tackling a driveway, porch, or even a ramp, this system provides peace of mind with minimal hassle.

Ready to make winter safer and stress-free? Choose ELEKTRA SnowTec 300 W/m² heating mats for reliable snow and ice protection at home. Simple to install, energy-efficient, and built to last—your driveway, walkways, and ramps will stay clear no matter the weather.

👉 Explore the product now in our shop: ELEKTRA SnowTec Heating Mats